Aluminum Hourglass Sleeve

 

Aluminum Hourglass Sleeves

Sleeves, when properly applied, are capable of holding the rated breaking strength of the cable to which they are applied. However, to determine the exact holding strength, we recommend pull testing prior to use. This step ensures the proper selection of materials, the correct pressing procedure and an adequate margin of safety for the intended use.

Sleeves, when properly applied, are capable of holding the rated breaking strength of the cable to which they are applied. However, to determine the exact holding strength, PULL TESTING IS ESSENTIAL prior to use. This step insures the proper selection of materials, the correct swaging procedure, and an ample margin of safety for the intended use.

Aluminum Hourglass Sleeve DimensionsAluminum Fiber Rope Sleeves, Hourglass Sleeves and Oval Sleeves:

  • Sleeves are used to create loop ends on cable assemblies, but they can also be used to attach two assemblies together.
  • Hourglass (duplex) shaped sleeves allow for the smoothest swage (crimp).
  • Prevent Fraying of Wire/Aircraft Accessory
  • Capable of supporting a greater load than the rated breaking strength of the cable to which they are attached.
  • Ideal for general outdoor, marine, corrosive and other harsh environments.

 

Rope Size &
Sleeve Size		 A
Outside Diameter		 B
Outside Height Diameter		 C
Inside Diameter		 D
Length		 Approx. Wt.
Per 1000 Pcs.
 1/32 HG .090 .136 .040 1/4 .16
3/64 HG .133 .196 .071 3/8 .5
1/16 HG .172 .250 .078 3/8 .9
5/64 HG .219 .313 .094 3/8 1.6
3/32 HG .278 .404 .130 1/2 3.2
1/8 HG .343 .500 .156 5/8 6.4
5/32 HG .375 .562 .187 11/16 8.0
3/16 HG .440 .665 .223 1 15.6
3/16 x 1/8 Comb. .430 .656 .160 & .230 1 16.2
7/32 HG .500 .750 .250 1 1/16 22.2
1/4 HG .536 .818 .290 1 1/8 25.2
9/32 HG .562 .880 .312 1 3/16 28.3
5/16 HG .687 1.031 .375 1 1/4 45.0
3/8 HG .750 1.156 .438 1 7/16 60.7
7/16 HG .937 1.437 .500 1 11/16 118.0
1/2 HG 1.062 1.625 .562 2 176.0